Skip to content

BH.oM.Structure.Results.BarStress

Resulting stresses in local coordinates along the bar.

Class structure

Implemented interfaces and base types

The BarStress is inheriting from the following base type(s) and implements the following interfaces:

Properties

Defining properties

The following properties are defined on the class

Name Type Description Quantity
Axial double Axial stress induced by an axial force along the Bar axis. Positive for tension, negative for compression. Stress [Pa]
ShearY double Shear stress along the local y-axis. Generally minor axis shear stress. Stress [Pa]
ShearZ double Shear stress along the local z-axis. Generally major axis shear stress. Stress [Pa]
BendingY_Top double Stress induced by bending about the local y-axis at the 'uppermost' extreme fiber. Generally the major axis bending stresses in one of the extreme fibers. Stress [Pa]
BendingY_Bot double Stress induced by bending about the local y-axis at the 'lowermost' extreme fiber. Generally the major axis bending stresses in one of the extreme fibers. Stress [Pa]
BendingZ_Top double Stress induced by bending about the local z-axis at the 'uppermost' extreme fiber. Generally the minor axis bending stresses in one of the extreme fibers. Stress [Pa]
BendingZ_Bot double Stress induced by bending about the local z-axis at the 'lowermost' extreme fiber. Generally the minor axis bending stresses in one of the extreme fibers. Stress [Pa]
CombAxialBendingPos double Worst case tensile normal stress from combined axial and bending in two directions. Stress [Pa]
CombAxialBendingNeg double Worst case compressive normal stress from combined axial and bending in two directions. Stress [Pa]

Inherited properties

The following properties are inherited from the base class of the object

Name Type Description Quantity
ObjectId IComparable Id of the bar that this result belongs to. When extracted from an analysis package, the object id will match the format and value used in that particular package. -
ResultCase IComparable Identifier for the Loadcase or LoadCombination that the result belongs to. Is generally name or number of the loadcase, depending on the analysis package. -
ModeNumber int Positive index, starting at one. Only set for cases with modal outputs such as dynamic cases. -
TimeStep double Time step for time history results. -
Position double Position on the bar as normalised length, i.e. 0 for start, 1 for end and 0.5 for middle. -
Divisions int How many division points along the bar was used when extracting this result. This generally means that this many results with the same ObjectId, ResultCase and TimeStep was extracted. -

Derived properties

The following properties are defined as extension methods in one of the BHoM_Engines

Name Type Description Quantity Engine
AllIdentifierProperties List<string> Gets the name of all properties of the result that are of identifier types. This is all properties tagged with any IdentifierAttribute. - Results_Engine
ObjectIdentifierProperties List<string> Gets the name of all properties of the result that are of ObjectIdentifier types. This is all properties tagged with the ObjectIdentifierAttribute. - Results_Engine
ResultPropertyKeys List<string> Returns the result value carrying properties available for the result type provided. Currently only supported for IResultItem and IResultCollection<IResultItem> type results. - Results_Engine
ScenarioIdentifierProperties List<string> Gets the name of all properties of the result that are of Scenario types. This is all properties tagged with the ScenarioIdentifierAttribute. - Results_Engine

Code and Schema

C# implementation

C#
public class BarStress : BH.oM.Structure.Results.BarResult,
BH.oM.Structure.Results.IStructuralResult,
BH.oM.Analytical.Results.IObjectIdResult,
BH.oM.Analytical.Results.IResult,
BH.oM.Base.IObject,
System.IComparable<BH.oM.Analytical.Results.IResult>,
BH.oM.Base.IImmutable,
BH.oM.Analytical.Results.ICasedResult,
BH.oM.Analytical.Results.ITimeStepResult,
BH.oM.Analytical.Results.IElement1DResult,
BH.oM.Analytical.Results.IResultItem

Assembly: Structure_oM.dll

The C# class definition is available on github:

All history and changes of the class can be found by inspection the history.

JSON Schema implementation

The object is defined as a JSON schema. You can validate a JSON instance against this schema by reference. To do this, use the schema reference below in a validator like this one.

JSON Schema
{
 "$ref" : "https://raw.githubusercontent.com/BHoM/BHoM_JSONSchema/develop/Structure_oM/Results/BarStress.json"
}

The JSON Schema is available on github here: